conspit

Conspit 290GP The Conspit 290GP is a Formula steering wheel built around a three-dimensional layout: controls are stacked to sit under the thumbs, inspired by aircraft HOTAS controls. It combines a moulded carbon fibre front panel and a die-cast aluminium body, a 4.3-inch 854...

Conspit 300 GT Champion Edition The Conspit 300 GT Champion Edition is a limited edition of the 300 GT co-created with Yifei Ye, 2025 Le Mans 24 Hours winner and Conspit global ambassador. It keeps the 300 GT hardware (300 mm, 1150 g, 2.99-inch...

Conspit 300 GT The Conspit 300 GT is a 300 mm GT and endurance wheel weighing 1150 g. Its 3D-moulded T-300 carbon front panel and aluminium body keep it light and rigid, which preserves force feedback detail. It packs a 2.99-inch screen with 7...

Conspit 310 Apex The Conspit 310 Apex is a 310 mm round GT wheel built around a die-cast aluminium housing with a 3D front panel. It combines a 2.99-inch 800 × 268 screen with 7 telemetry pages, 8 RGB buttons, 2 encoders, 2 7-way...

Conspit 50–70 mm PCD Spacer The Conspit 50–70 mm PCD Spacer converts between the 50 mm bolt pattern of Conspit quick releases and the 70 mm pattern used by most third-party wheels. Machined from aluminium and weighing under 200 g, it fits between the...

Conspit Apex Bundle The Conspit Apex Bundle brings together a complete set: the Ares Apex 8 Nm direct drive base, the 310 Apex steering wheel with its CDR quick release, and the CPP Apex hydraulic pedals. Everything is set up in Conspit Link 2.0,...

Conspit Ares 12 Nm CDP This is the Conspit Ares 12 in its CDP quick release version, the ball-lock system machined from 7075 aluminium used by the first Conspit wheels. Inside: a skew-pole direct drive motor developed for sim racing, a 23-bit optical encoder,...

Conspit Ares 12 Nm CDR + CSD Nano The Conspit Ares 12 delivers 12 Nm through a skew-pole direct drive motor and a 23-bit optical encoder, in a compact 243 mm, 5.6 kg aluminium housing. Its CDR quick release gives a rigid, wear-free wheel...

Conspit Ares 15 cm Extension Rod The Conspit Ares 15 cm Extension Rod fits between an Ares base and its quick release to bring the wheel 150 mm closer to the driver. Machined from anodised aluminium, it carries an internal extension cable so the...

Conspit Ares 20 Platinum CDR + CSD Nano The Conspit Ares 20 Platinum is the most powerful base in the Ares series: 20 Nm through a skew-pole direct drive motor and a 23-bit optical encoder, with a torque slew rate up to 9.5 Nm/ms,...

Conspit Ares Apex 8 Nm The Conspit Ares Apex is the most compact base in the Ares series. It keeps the series' core technology – a skew-pole direct drive motor developed specifically for sim racing, asymmetric dual processors and Conspit Link 2.0 – in...

Conspit Ares Apex Desk Mount The Conspit Ares Apex Desk Mount clamps the Ares Apex 8 Nm direct drive base to a desk or table, for drivers without a cockpit. The base fixes to the aluminium plate with four screws and the plate grips...

Conspit Ares Bracket for Aluminium Profile The Conspit Ares Bracket mounts an Ares 12 or Ares 20 Platinum direct drive base on an aluminium profile rig. Machined from aluminium, it lets you adjust the angle and the height of the base, and holds it...

Conspit ARX320 The Conspit ARX320 is a 320 mm rally replacement rim for the Conspit 310 Apex. Its diameter matches real rally wheels for leverage in large, fast corrections, and it is wrapped in SpeedSuede, Conspit's own high-grip suede. A 3-point mounting maximises rigidity...

Conspit Build Your Own Bundle – Ares CDR The Conspit Build Your Own Bundle – Ares CDR lets you put together a complete Conspit setup in three choices: an Ares Direct Drive base (8, 12 or 20 Nm), a steering wheel from the Conspit...

Conspit Quick Release CDP The Conspit CDP is the wheel-side quick release for Conspit Ares bases fitted with the CDP system, such as the Ares 12 and Ares 20 Platinum CDP. A CNC-machined 7075 aluminium claw carries the torque while a ball detent holds...

Conspit CDR Quick Release, Base Side The Conspit CDR base side is the module that mounts on the shaft of a Conspit Ares base to receive the CDR quick release. It fixes with six screws, carries the signal through pogo pin contacts, and forms...

Conspit CDR Quick Release The Conspit CDR is the wheel-side half of Conspit's NRG-style quick release, used on the Ares Apex 8 Nm and the CDR versions of the Ares 12 and Ares 20 Platinum. Push the wheel on and it locks automatically; pull...

Conspit CES E-Stop The Conspit CES E-Stop is an external emergency stop button for Conspit Ares direct drive bases. One press cuts the motor instantly, which matters on a base that can deliver 12 or 20 Nm. It connects plug and play, and its...

Conspit CHS The Conspit CHS is a compact all-metal shifter that switches between H-pattern and sequential with a single mode switch. Built around a mechanism developed in-house by Conspit, it offers 7 gears plus reverse in H-pattern mode, with a lock-release lever for reverse...

Conspit CPP Apex Clutch The Conspit CPP Apex Clutch is the optional clutch pedal for the Conspit CPP Apex pedals. It mounts on the existing set and turns a 2-pedal setup into a 3-pedal setup, for manual starts and gearboxes with a clutch. Key...

Conspit CPP Apex The Conspit CPP Apex is a 2-pedal hydraulic set (throttle and brake). Its brake uses a one-piece die-cast aluminium dual-chamber cylinder with a 10 MPa pressure sensor and a two-stage feel: a spring for the first part of the travel, then...

Conspit CPP EVO Clutch The Conspit CPP EVO Clutch is the optional clutch pedal for the Conspit CPP EVO V2 pedals. It mounts on the existing set and turns a 2-pedal setup into a 3-pedal setup, for manual starts and gearboxes with a clutch....

Conspit CPP EVO V2 Champion Edition The Conspit CPP EVO V2 is Conspit's top hydraulic pedal set, here in its 3-pedal version (throttle, brake and clutch). Its 2nd-generation dual-stage brake combines springs and elastomers with independent preload on each stage, read by a 20...

Conspit CPP EVO V2 – 2 pedals The Conspit CPP EVO V2 is Conspit's top hydraulic pedal set, here in its 2-pedal version (throttle and brake). Its 2nd-generation dual-stage brake combines springs and elastomers with independent preload on each stage, read by a 20...

Conspit CPP EVO V2 – 3 pedals The Conspit CPP EVO V2 is Conspit's top hydraulic pedal set, here in its 3-pedal version (throttle, brake and clutch). Its 2nd-generation dual-stage brake combines springs and elastomers with independent preload on each stage, read by a...

Conspit CPP Lite Clutch The Conspit CPP Lite Clutch is the optional clutch pedal for the Conspit CPP Lite pedals. It mounts on the existing set and turns a 2-pedal setup into a 3-pedal setup, for manual starts and gearboxes with a clutch. Key...

Conspit CPP Lite – 2 pedals The Conspit CPP Lite is a hydraulic pedal set (throttle and brake) built in CNC-machined T6 aluminium. Its brake uses Conspit's generation 1.5 hydraulic system, with a redesigned internal chamber for better damping, a coated cylinder and an...

Conspit CPP Lite – 3 pedals The Conspit CPP Lite is a hydraulic pedal set (throttle, brake and clutch) built in CNC-machined T6 aluminium. Its brake uses Conspit's generation 1.5 hydraulic system, with a redesigned internal chamber for better damping, a coated cylinder and...

Conspit CSD SimHub Special Edition The Conspit CSD SimHub Special Edition is a 5-inch telemetry dashboard developed with SimHub. Its 854 × 480 IPS touchscreen shows gear, RPM, speed, lap times, delta and session data, while 31 RGB LEDs split into four zones handle...

Conspit CSD Lite The Conspit CSD Lite is a 5-inch IPS touchscreen dashboard for SimHub, on PC. Its 854 × 480 display runs at 45 fps and 350 lumens, and 31 RGB LEDs split into four zones handle RPM lights, flags and alerts, with...

Conspit CSD Nano The Conspit CSD Nano is a compact telemetry display with a 2.99-inch LCD, designed to clip onto the front of Conspit Ares and Ares Platinum wheelbases. Built-in magnets and pogo-pin contacts handle mounting and data in one step, with no exposed...

Conspit CX295 The Conspit CX295 is a 295 mm D-shaped rim for the Conspit H.AO Hub. It is wrapped in a single piece of synthetic leather, perforated on the inside of the grips, with blue stitching and top marker. It has no electronics: all...

Conspit DX320 The Conspit DX320 is a 320 mm D-shaped rim for the Conspit H.AO Hub. It is wrapped in a single piece of synthetic leather, perforated on the inside of the grips, with red stitching and top marker. It has no electronics: all...

Conspit EX 300 The Conspit EX 300 is a 300 mm flat-bottom replacement rim for the Conspit 310 Apex, designed for endurance racing. Its smaller diameter quickens steering compared with the standard 310 mm rim, raised grip zones keep the hands in the same...

Conspit Front Mount The Conspit Front Mount is a one-piece bracket to mount a Conspit Ares direct drive base by its front face on an aluminium profile rig. It uses the mounting points already on the base, so no drilling is needed, and its...

Conspit H.AO Hub The Conspit H.AO Hub is a carbon fibre hub with a screen, designed to be paired with a 70 mm rim. Its prepreg carbon shell weighs 1100 g and carries a 2.99-inch 800 × 268 screen, 9 RPM LEDs, 10 RGB...

Conspit H3 The Conspit H3 is a hydraulic handbrake designed for drift and rally. It uses Conspit's patented hydraulic system, built around a master cylinder with no external oil lines, with an upgraded internal oil circuit for smoother damping, an extended piston and a...

Conspit M-DVF Vibration Kit The Conspit M-DVF kit contains three vibration modules for the Conspit CPP Apex pedals. They mount on the back of the throttle, brake and clutch, and connect to the CPP Apex control board. Set up in Conspit software or SimHub...

Conspit MAX 01 The Conspit MAX 01 is a Formula wheel built around a 4-inch 800 × 480 touchscreen compatible with SimHub. Its 5 mm carbon front panel and one-piece aluminium chassis carry 10 RGB buttons, 4 encoders, 4 dual-mode 12-position rotary switches, 2...

Conspit PW1 The Conspit PW1 is a 280 mm Formula wheel produced as a limited edition of 500 units. Its front and rear shells are made of T300 prepreg carbon fibre, and it combines a 4.3-inch 800 × 480 screen, 14 buttons, 6 encoders,...

Conspit Quick-Con Adapter The Conspit Quick-Con Adapter is a 70 mm PCD quick release in solid aluminium with its own USB connection and a detachable coiled cable. It lets you mount a Conspit wheel on a direct drive base from another brand, such as...

Conspit RX320 The Conspit RX320 is a 320 mm round rim for the Conspit H.AO Hub. It is wrapped in a single piece of synthetic leather, perforated on the inside of the grips, with purple stitching and top marker. It has no electronics: all...

Conspit USB-A Adapter Spacer The Conspit USB-A Adapter Spacer fits between a Conspit Ares base and its quick release and adds a USB-A port on the shaft. A third-party USB wheel, or a coiled cable, plugs into it and is passed through to the...

REFURB - Conspit 310 Apex GT Steering Wheel – Certified Pre-Owned Certified pre-owned Conspit 310 Apex — excellent condition, fully tested, 2-year warranty, discounted price. Full-featured 310 mm GT wheel with 2.99″ built-in LCD display, 104 programmable inputs, 41 customizable RGB LEDs, silent magnetic...

REFURB - Conspit Ares Apex 8Nm Direct Drive Wheelbase – Certified Pre-Owned Certified pre-owned Conspit Ares Apex 8Nm (CDR QR version) — excellent condition, fully tested, 2-year warranty, discounted price. Latest-generation Direct Drive base with custom skew-pole motor, dual 170+168 MHz processors, 21-bit magnetic...

REFURB - Conspit CPP-Evo Hydraulic 3 Pedals – Certified Pre-Owned Conspit CPP-Evo Hydraulic 3 Pedals, certified pre-owned, excellent condition. Fully tested, 2-year warranty, discounted price. Dual-stage hydraulic, CNC aluminum, M-DVF vibration module. Condition: Excellent, certified by The French SimracerWarranty: 2 yearsTested and approved return...