SIMAGIC P700 Racing Kit

SIMAGIC P700 Racing Kit

The SIMAGIC P700 Racing Kit is an accessory and adjustment kit for the SIMAGIC P700 pedal set. It lets you tune pedal feel, replace the brake pedal elastomer assembly, adjust the pedal face and install the included heightened short bracket assemblies. The kit is intended for use when the pedals are mounted on a sim racing rig.

Adjustable Pedal Feel

The kit includes three sizes of large elastomer springs, three small elastomer springs and a gold compression spring. These components provide different setup options for the P700 pedal system. The appropriate configuration depends on your preferred pedal feel and the installation instructions in the official manual.

• A55 large elastomer springs: 3
• A75 large elastomer springs: 3
• A85 large elastomer springs: 3
• A55 small elastomer spring: 1
• A75 small elastomer spring: 1
• A85 small elastomer spring: 1
• Gold compression spring: 1

Limit Bushing and Stainless Steel Sleeve

The P700 Racing Kit includes two large limit bushing and stainless steel sleeve sets. The manual describes these parts as replacement components for the throttle or clutch, allowing the original rubber bushing to be removed and replaced.

• Large limit bushing with stainless steel sleeve: 2 sets
• For throttle or clutch bushing replacement
• Installation requires removal and refitting of the relevant screws and nuts

Pedal Heightened Short Bracket Assemblies

Three P700 Pedal Heightened Short Bracket Assemblies are included. The manual explains how to align a pedal face with a bracket and secure it using the specified M4×6 socket head cap screws. The bracket also supports pedal face position and angle adjustment through the corresponding mounting holes.

• P700 pedal heightened short bracket assemblies: 3
• Pedal face position adjustment
• Pedal face angle adjustment
• M4×6 socket head cap screws are specified in the manual for bracket installation

Package Contents

• A55 large elastomer springs: 3
• A75 large elastomer springs: 3
• A85 large elastomer springs: 3
• A55 small elastomer spring: 1
• A75 small elastomer spring: 1
• A85 small elastomer spring: 1
• Gold compression spring: 1
• Large limit bushing and stainless steel sleeve sets: 2
• P700 pedal heightened short bracket assemblies: 3
• Size 8 open-end wrench: 1
• Quick Guide: 1

Installation and Setup

Use the quick-release cap and follow the manual procedure when removing a spring assembly. Replace the spring or elastomer with a component of the desired stiffness, then reinstall the assembly correctly. For the limit bushing, remove the screws and nuts, replace the original rubber bushing and fasten the replacement using the removed hardware.

For bracket installation, remove the relevant screws, align the pedal face and bracket with the mounting holes, and secure the assembly with the specified screws. The pedal face position and angle can be adjusted using the corresponding holes. Do not operate the pedals without proper installation.

Compatibility and Software Information

• Designed for the SIMAGIC P700 pedal set
• For use on a mounted sim racing rig
• Firmware and related files should be obtained through SIMAGIC's official download centre
• Game support information is available through SIMAGIC's telemetry support page
• Compatibility with other pedal models is not confirmed in the supplied manual

Safety, Certification and Warranty

This product is intended for indoor sim racing use only. The manual specifies an operating temperature of 0°C to 40°C and humidity of 20% to 80% RH, non-condensing. Keep small parts away from children, install the product securely and do not disassemble or service it yourself. The manual states compliance with RoHS requirements under Directives 2011/65/EU and 2015/863 and with REACH Regulation (EC) No. 1907/2006.

The manual states a 24-month warranty period from the date of purchase, subject to its terms and exclusions. Keep the product serial number and proof of purchase for after-sales support.

Frequently Asked Questions

What is the SIMAGIC P700 Racing Kit?

It is an accessory and adjustment kit for the SIMAGIC P700 pedal set, including elastomer springs, a compression spring, limit bushing and sleeve sets, heightened short bracket assemblies, a wrench and a Quick Guide.

Can I change the P700 brake pedal feel?

Yes. The kit includes A55, A75 and A85 elastomer springs in large and small formats, plus a gold compression spring. Follow the official manual when selecting and installing the components.

What are the bracket assemblies used for?

The three P700 heightened short bracket assemblies are used to modify the pedal mounting arrangement. The pedal face position and angle can be adjusted through the corresponding mounting holes.