{"product_id":"simnet-plate-for-shifters-and-handbrake","title":"SimNet Plate for Shifters and Handbrake","description":"\u003ch2\u003eSimNet Plate for Shifters and Handbrake\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSimNet Plate for Shifters and Handbrake\u003c\/strong\u003e is the optional \u003cstrong\u003eA-PHS mounting plate\u003c\/strong\u003e designed to combine a SimNet shifter and SimNet handbrake in one integrated sim racing assembly. It helps position both controls close to your natural hand position for rally, drift and other demanding driving setups.\u003c\/p\u003e\n\u003ch3\u003ePlate Dimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOverall width: \u003cstrong\u003e140 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOverall height: \u003cstrong\u003e195 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlate thickness: \u003cstrong\u003e6 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRounded corner radius shown on the drawing: \u003cstrong\u003eR3\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCentral vertical slot: \u003cstrong\u003e6 mm wide × 119 mm long\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdditional internal vertical dimension shown: \u003cstrong\u003e179 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe drawing also shows multiple circular holes and upper and lower horizontal slots. Dimensions of 15 mm, 18 mm, 18 mm, 15 mm and 25 mm appear in the upper dimension chain. Values of 10 mm on the left and 14 mm on the right, together with repeated vertical dimensions of 99.50 mm and 104 mm, are also visible. The drawing does not make the exact reference of every one of these values sufficiently clear to identify them all as hole centres, slot lengths or edge distances.\u003c\/p\u003e\n\u003ch3\u003eCombined Shifter and Handbrake Mount\u003c\/h3\u003e\n\u003cp\u003eThe A-PHS plate is designed to hold the \u003cstrong\u003eSimNet SSQ-1 Sequential Shifter\u003c\/strong\u003e and the \u003cstrong\u003eSimNet SHB-100 Handbrake\u003c\/strong\u003e together. This creates a compact combined control unit while keeping each device independently adjustable.\u003c\/p\u003e\n\u003ch3\u003eIndependent Position Adjustment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal adjustment for each device\u003c\/li\u003e\n\u003cli\u003eVertical adjustment for each device\u003c\/li\u003e\n\u003cli\u003eDefined rotational adjustment range for each device\u003c\/li\u003e\n\u003cli\u003ePositioning designed to improve reach, comfort and control efficiency\u003c\/li\u003e\n\u003cli\u003eMultiple mounting openings are shown on the plate in the official guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLeft-Hand-Drive and Right-Hand-Drive Layouts\u003c\/h3\u003e\n\u003cp\u003eThe plate can be flipped to adapt the installation to different cockpit layouts. The guide illustrates configurations for \u003cstrong\u003eLHD\u003c\/strong\u003e left-hand-drive and \u003cstrong\u003eRHD\u003c\/strong\u003e right-hand-drive setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLHD:\u003c\/strong\u003e left-hand-drive cockpit layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRHD:\u003c\/strong\u003e right-hand-drive cockpit layout\u003c\/li\u003e\n\u003cli\u003eFlip the A-PHS plate to change the orientation shown in the guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Concept\u003c\/h3\u003e\n\u003cp\u003eInstall the SSQ-1 shifter and SHB-100 handbrake on the A-PHS plate, then adjust each unit independently to achieve the preferred horizontal, vertical and rotational position. The plate is a mechanical mounting accessory; it does not replace the USB or TRANSIT connections of the connected devices.\u003c\/p\u003e\n\u003ch3\u003eDesigned for Rally and Drift Setups\u003c\/h3\u003e\n\u003cp\u003eBy grouping the sequential shifter and handbrake, the A-PHS plate makes both controls available in the same operating area. The arrangement is particularly suited to rally and drift configurations where rapid movement between the shifter and handbrake is required.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimNet SSQ-1 Sequential Shifter\u003c\/li\u003e\n\u003cli\u003eSimNet SHB-100 Handbrake\u003c\/li\u003e\n\u003cli\u003eLHD and RHD cockpit orientations\u003c\/li\u003e\n\u003cli\u003eThe guide does not confirm compatibility with other shifter or handbrake brands\u003c\/li\u003e\n\u003cli\u003eThe guide does not specify a particular cockpit brand or mounting standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMounting and Hardware Information\u003c\/h3\u003e\n\u003cp\u003eThe official guide and supplied dimension drawing show the A-PHS as a 6 mm thick perforated mounting plate with multiple holes and elongated openings for positioning. The drawing identifies the overall size as 140 × 195 mm and the central slot as 6 × 119 mm. It does not clearly identify every hole diameter, every horizontal slot length or the exact reference of all secondary dimensions. The drawing and guide do not provide a complete screw list or torque value.\u003c\/p\u003e\n\u003ch3\u003eWhat Is Included\u003c\/h3\u003e\n\u003cp\u003eThe A-PHS is documented as an optional mounting plate. The supplied guide does not confirm the complete retail box contents, mounting screws, tools or whether hardware is supplied with the plate. Confirm the contents of the specific product reference before ordering.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch3\u003eWhat is the SimNet A-PHS plate used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to mount a SimNet SSQ-1 Sequential Shifter and the SimNet SHB-100 Handbrake together in one adjustable assembly.\u003c\/p\u003e\n\u003ch3\u003eCan the plate be used for LHD and RHD setups?\u003c\/h3\u003e\n\u003cp\u003eYes. The official guide shows that the plate can be flipped for left-hand-drive and right-hand-drive cockpit layouts.\u003c\/p\u003e\n\u003ch3\u003eCan the shifter and handbrake be adjusted independently?\u003c\/h3\u003e\n\u003cp\u003eYes. Each unit can be adjusted horizontally, vertically and through a defined range of rotation.\u003c\/p\u003e\n\u003ch3\u003eIs the A-PHS compatible with other brands?\u003c\/h3\u003e\n\u003cp\u003eThe supplied guide confirms the SSQ-1 and SHB-100 combination. Compatibility with other shifter or handbrake models is not confirmed.\u003c\/p\u003e\n","brand":"SimNet","offers":[{"title":"Default Title","offer_id":59051113546053,"sku":"A-PSH","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/6261\/7157\/files\/SimNet-Plate-for-Shifters-and-Handbrake-SimNet-472558450.png?v=1788289604","url":"https:\/\/thefrenchsimracer.com\/en\/products\/simnet-plate-for-shifters-and-handbrake","provider":"The French Simracer","version":"1.0","type":"link"}