{"product_id":"simagic-p700-racing-kit","title":"SIMAGIC P700 Racing Kit","description":"\u003ch2\u003eSIMAGIC P700 Racing Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSIMAGIC P700 Racing Kit\u003c\/strong\u003e is an accessory and adjustment kit for the SIMAGIC P700 pedal set. It lets you tune pedal feel, replace the brake pedal elastomer assembly, adjust the pedal face and install the included heightened short bracket assemblies. The kit is intended for use when the pedals are mounted on a sim racing rig.\u003c\/p\u003e\n\u003ch3\u003eAdjustable Pedal Feel\u003c\/h3\u003e\n\u003cp\u003eThe kit includes three sizes of large elastomer springs, three small elastomer springs and a gold compression spring. These components provide different setup options for the P700 pedal system. The appropriate configuration depends on your preferred pedal feel and the installation instructions in the official manual.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA55 large elastomer springs: 3\u003c\/li\u003e\n\u003cli\u003eA75 large elastomer springs: 3\u003c\/li\u003e\n\u003cli\u003eA85 large elastomer springs: 3\u003c\/li\u003e\n\u003cli\u003eA55 small elastomer spring: 1\u003c\/li\u003e\n\u003cli\u003eA75 small elastomer spring: 1\u003c\/li\u003e\n\u003cli\u003eA85 small elastomer spring: 1\u003c\/li\u003e\n\u003cli\u003eGold compression spring: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimit Bushing and Stainless Steel Sleeve\u003c\/h3\u003e\n\u003cp\u003eThe P700 Racing Kit includes two large limit bushing and stainless steel sleeve sets. The manual describes these parts as replacement components for the throttle or clutch, allowing the original rubber bushing to be removed and replaced.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge limit bushing with stainless steel sleeve: 2 sets\u003c\/li\u003e\n\u003cli\u003eFor throttle or clutch bushing replacement\u003c\/li\u003e\n\u003cli\u003eInstallation requires removal and refitting of the relevant screws and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePedal Heightened Short Bracket Assemblies\u003c\/h3\u003e\n\u003cp\u003eThree \u003cstrong\u003eP700 Pedal Heightened Short Bracket Assemblies\u003c\/strong\u003e are included. The manual explains how to align a pedal face with a bracket and secure it using the specified M4×6 socket head cap screws. The bracket also supports pedal face position and angle adjustment through the corresponding mounting holes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eP700 pedal heightened short bracket assemblies: 3\u003c\/li\u003e\n\u003cli\u003ePedal face position adjustment\u003c\/li\u003e\n\u003cli\u003ePedal face angle adjustment\u003c\/li\u003e\n\u003cli\u003eM4×6 socket head cap screws are specified in the manual for bracket installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA55 large elastomer springs: 3\u003c\/li\u003e\n\u003cli\u003eA75 large elastomer springs: 3\u003c\/li\u003e\n\u003cli\u003eA85 large elastomer springs: 3\u003c\/li\u003e\n\u003cli\u003eA55 small elastomer spring: 1\u003c\/li\u003e\n\u003cli\u003eA75 small elastomer spring: 1\u003c\/li\u003e\n\u003cli\u003eA85 small elastomer spring: 1\u003c\/li\u003e\n\u003cli\u003eGold compression spring: 1\u003c\/li\u003e\n\u003cli\u003eLarge limit bushing and stainless steel sleeve sets: 2\u003c\/li\u003e\n\u003cli\u003eP700 pedal heightened short bracket assemblies: 3\u003c\/li\u003e\n\u003cli\u003eSize 8 open-end wrench: 1\u003c\/li\u003e\n\u003cli\u003eQuick Guide: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Setup\u003c\/h3\u003e\n\u003cp\u003eUse the quick-release cap and follow the manual procedure when removing a spring assembly. Replace the spring or elastomer with a component of the desired stiffness, then reinstall the assembly correctly. For the limit bushing, remove the screws and nuts, replace the original rubber bushing and fasten the replacement using the removed hardware.\u003c\/p\u003e\n\u003cp\u003eFor bracket installation, remove the relevant screws, align the pedal face and bracket with the mounting holes, and secure the assembly with the specified screws. The pedal face position and angle can be adjusted using the corresponding holes. Do not operate the pedals without proper installation.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and Software Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the SIMAGIC P700 pedal set\u003c\/li\u003e\n\u003cli\u003eFor use on a mounted sim racing rig\u003c\/li\u003e\n\u003cli\u003eFirmware and related files should be obtained through SIMAGIC's official download centre\u003c\/li\u003e\n\u003cli\u003eGame support information is available through SIMAGIC's telemetry support page\u003c\/li\u003e\n\u003cli\u003eCompatibility with other pedal models is not confirmed in the supplied manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety, Certification and Warranty\u003c\/h3\u003e\n\u003cp\u003eThis product is intended for indoor sim racing use only. The manual specifies an operating temperature of 0°C to 40°C and humidity of 20% to 80% RH, non-condensing. Keep small parts away from children, install the product securely and do not disassemble or service it yourself. The manual states compliance with RoHS requirements under Directives 2011\/65\/EU and 2015\/863 and with REACH Regulation (EC) No. 1907\/2006.\u003c\/p\u003e\n\u003cp\u003eThe manual states a 24-month warranty period from the date of purchase, subject to its terms and exclusions. Keep the product serial number and proof of purchase for after-sales support.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch3\u003eWhat is the SIMAGIC P700 Racing Kit?\u003c\/h3\u003e\n\u003cp\u003eIt is an accessory and adjustment kit for the SIMAGIC P700 pedal set, including elastomer springs, a compression spring, limit bushing and sleeve sets, heightened short bracket assemblies, a wrench and a Quick Guide.\u003c\/p\u003e\n\u003ch3\u003eCan I change the P700 brake pedal feel?\u003c\/h3\u003e\n\u003cp\u003eYes. The kit includes A55, A75 and A85 elastomer springs in large and small formats, plus a gold compression spring. Follow the official manual when selecting and installing the components.\u003c\/p\u003e\n\u003ch3\u003eWhat are the bracket assemblies used for?\u003c\/h3\u003e\n\u003cp\u003eThe three P700 heightened short bracket assemblies are used to modify the pedal mounting arrangement. The pedal face position and angle can be adjusted through the corresponding mounting holes.\u003c\/p\u003e","brand":"Simagic","offers":[{"title":"Default Title","offer_id":59098288390469,"sku":"SMG-AC-KIT","price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/6261\/7157\/files\/SIMAGIC-P700-Racing-Kit-Simagic-473522442.png?v=1790961871","url":"https:\/\/thefrenchsimracer.com\/en\/products\/simagic-p700-racing-kit","provider":"The French Simracer","version":"1.0","type":"link"}