{"product_id":"qubic-system-qs-tp1-traction-pro-motion-system","title":"Qubic System QS-TP1 Traction Pro – Motion System","description":"\u003ch2\u003eQubic System QS-TP1 Traction Pro\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eQubic System QS-TP1 Traction Pro\u003c\/strong\u003e is a \u003cstrong\u003e2DoF motion platform (surge + yaw)\u003c\/strong\u003e that puts the rear of the car under you: oversteer, braking, acceleration and road texture. Two actuators run the length of the frame around a \u003cstrong\u003efixed front pivot\u003c\/strong\u003e, so the whole cockpit swings around its nose the way a car does when the rear lets go. Run it on its own with your cockpit on top, or mount it under a \u003cstrong\u003eQS-210 or QS-220 3DOF\u003c\/strong\u003e actuator set for a \u003cstrong\u003efive-axis platform\u003c\/strong\u003e. Designed and made in Poland (EU).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge + yaw:\u003c\/strong\u003e ±30 mm surge and ±8° yaw for traction loss, braking and acceleration cues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatency under 8 ms:\u003c\/strong\u003e the platform reacts to telemetry fast enough for you to feel the slide begin while there is still time to correct it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront pivot design:\u003c\/strong\u003e drive both actuators together for surge, against each other for pure rotation of the rear around a fixed point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone or 5 axes:\u003c\/strong\u003e works with a cockpit directly on top, or under QS-210 \/ QS-220 3DOF actuators for up to five axes, without replacing anything you already own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoad detail without a bass shaker:\u003c\/strong\u003e road harshness, rumble strips, engine vibrations, gear changes and ABS (vibration range 0–100 Hz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat-pack delivery:\u003c\/strong\u003e the kit ships in three compact cartons that fit through standard doors, no pallet or forklift needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo versions:\u003c\/strong\u003e self-assembly kit or pre-assembled, with the same hardware and specifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQubic Manager software:\u003c\/strong\u003e free licence (activated with the QS-TP1 serial number), plug-and-play with major racing and flight titles on PC, VR motion compensation ready.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArchitecture:\u003c\/strong\u003e 2DoF (surge + yaw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge:\u003c\/strong\u003e ±30 mm (60 mm stroke)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYaw:\u003c\/strong\u003e ±8°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax payload:\u003c\/strong\u003e 250 kg (551.2 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax acceleration:\u003c\/strong\u003e up to 0.6 G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax velocity:\u003c\/strong\u003e up to 400 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatency:\u003c\/strong\u003e \u0026lt;8 ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration range:\u003c\/strong\u003e 0–100 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal length:\u003c\/strong\u003e 1271 mm (50.04 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal width:\u003c\/strong\u003e 850 mm (33.46 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal height:\u003c\/strong\u003e 273 mm with cockpit adapters \/ 238 mm with actuator cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating footprint:\u003c\/strong\u003e 1294 × 493 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform weight:\u003c\/strong\u003e 86 kg (189.6 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCockpit width range:\u003c\/strong\u003e 540–650 mm (adapters, inside mounting) \/ 646–756 mm (adapters, outside mounting) \/ 650–750 mm (actuator cups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 120\/230 VAC ±10%, 50–60 Hz, single phase with ground and neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower draw (230 V):\u003c\/strong\u003e 0.95 kVA average \/ 1.0 kVA peak, 5 A average \/ 14 A peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower draw (120 V):\u003c\/strong\u003e 0.8 kVA average \/ 0.85 kVA peak, 7 A average \/ 23 A peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e USB and Ethernet socket included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware:\u003c\/strong\u003e Qubic Manager (PC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQS-TP1 platform: three cartons plus the actuator set (self-assembly kit) or core platform pre-assembled\u003c\/li\u003e\n\u003cli\u003eCockpit adapter brackets (two mounting orientations)\u003c\/li\u003e\n\u003cli\u003eCaptive cups for a QS-210 \/ QS-220 3DOF actuator set\u003c\/li\u003e\n\u003cli\u003eAssembly tools, gloves, slider grease and threadlocker (kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQS-MC6 controller not included:\u003c\/strong\u003e required if the QS-TP1 is your only Qubic device. If you already run a Qubic platform, the QS-TP1 joins its existing motion lock circuit through the CFG switch settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCockpit not included.\u003c\/strong\u003e Floor anchor bolts are not included either, as they depend on your floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e a few hours, in a fixed order (bottom frame, top frame, actuators, joining the two, then powered geometry and motion tests). You will need a tape measure, a torque wrench and about 2 × 2 m of clear floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical installation:\u003c\/strong\u003e a residual current circuit breaker is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchoring:\u003c\/strong\u003e recommended when the QS-TP1 stands on the floor. A platform resting on actuators is a different installation, so choose your configuration before you build.\u003c\/li\u003e\n\u003cli\u003eFollow the Qubic System product manual for installation and setup requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCockpits:\u003c\/strong\u003e aluminium profile cockpits from 540 to 756 mm wide (21.26 to 29.76 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQubic System QS-210 \/ QS-220 (3DOF):\u003c\/strong\u003e mounts under the actuator set for a five-axis platform; the QS-210\/220 handles body motion (lateral accelerations, vertical G-force, roll, pitch) and the QS-TP1 handles traction loss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQS-210 \/ QS-220 + Pivot (2DOF):\u003c\/strong\u003e announced as coming soon by Qubic System.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQubic System QS-BT1:\u003c\/strong\u003e compatible. The platform moves you in surge and yaw while the belt tensioner works on your shoulders and chest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e PC with Qubic Manager. Supported games depend on the telemetry each title exposes; some effects are not supported by every game.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich model to choose\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-assembly kit:\u003c\/strong\u003e three cartons plus the actuator set, built by you with the step-by-step manual. Ideal if you want to know your platform inside out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-assembled:\u003c\/strong\u003e the core platform arrives largely built; you complete the installation, mount your cockpit and calibrate. A good choice for showrooms, commercial installations or if you want to drive sooner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQS-TP1 or QS-CH2?\u003c\/strong\u003e Both cover traction loss. The QS-TP1 rotates further (±8.0° yaw vs ±7.2°) and ships as a kit or pre-assembled. The QS-CH2 travels further in surge and carries more, in one pre-built unit sized for a permanent rig.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch3\u003eWhat does the QS-TP1 add to my QS-210 or QS-220 platform?\u003c\/h3\u003e\n\u003cp\u003eSurge and yaw. Your actuators move the car body up, down and side to side; the QS-TP1 goes underneath them and rotates it, which is what oversteer, traction loss and braking feel like. Together, that is a five-axis platform.\u003c\/p\u003e\n\u003ch3\u003eCan I use the QS-TP1 without vertical actuators?\u003c\/h3\u003e\n\u003cp\u003eYes, with a cockpit mounted directly on the platform. That setup delivers traction loss, braking, acceleration, road harshness and rumble strips. QS-210 or QS-220 actuators can be added later without replacing anything.\u003c\/p\u003e\n\u003ch3\u003eDo I need a QS-MC6 controller?\u003c\/h3\u003e\n\u003cp\u003eYes, if the QS-TP1 is your only Qubic device. The QS-MC6 is sold separately. If you already run a Qubic platform, the QS-TP1 joins its existing motion lock circuit.\u003c\/p\u003e\n\u003ch3\u003eIs the software included?\u003c\/h3\u003e\n\u003cp\u003eYes. Qubic Manager is required and the licence is free of charge; the QS-TP1 serial number is needed for activation.\u003c\/p\u003e\n\u003ch3\u003eWhat power supply is required?\u003c\/h3\u003e\n\u003cp\u003e120\/230 VAC ±10%, 50–60 Hz, single phase with ground and neutral. A residual current circuit breaker is required.\u003c\/p\u003e\n\u003ch3\u003eWho handles warranty and after-sales service?\u003c\/h3\u003e\n\u003cp\u003eThe French Simracer handles after-sales service for the Qubic System QS-TP1, with a France-based contact. You benefit from the 2-year legal warranty, or the manufacturer warranty if longer.\u003c\/p\u003e\n","brand":"Qubic System","offers":[{"title":"Self-assembly kit","offer_id":59824425992517,"sku":"QS-TP1","price":6739.9,"currency_code":"EUR","in_stock":true},{"title":"Pre-assembled","offer_id":59824426025285,"sku":"QS-TP1-PRE","price":9119.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/6261\/7157\/files\/qubic-system-qs-tp1-01.jpg?v=1792506580","url":"https:\/\/thefrenchsimracer.com\/en\/products\/qubic-system-qs-tp1-traction-pro-motion-system","provider":"The French Simracer","version":"1.0","type":"link"}