{"product_id":"heusinkveld-displaydash-mount","title":"Heusinkveld DisplayDash Mount","description":"\u003ch2\u003eHeusinkveld DisplayDash Mount\u003c\/h2\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eHeusinkveld DisplayDash Mount (HE-DD-M1)\u003c\/strong\u003e is the mounting system designed for the \u003cstrong\u003eHeusinkveld DisplayDash\u003c\/strong\u003e. It fixes onto an \u003cstrong\u003ealuminium profile sim rig\u003c\/strong\u003e and combines a \u003cstrong\u003e150 mm aluminium profile arm\u003c\/strong\u003e, \u003cstrong\u003etwo joints\u003c\/strong\u003e and a \u003cstrong\u003eVESA 100 × 100 plate\u003c\/strong\u003e, so you can place and angle the DisplayDash to match your driving position.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for the Heusinkveld DisplayDash:\u003c\/strong\u003e VESA 100 × 100 plate matching the rear of the DisplayDash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 mm aluminium profile arm\u003c\/strong\u003e with an M8 thread on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo joints\u003c\/strong\u003e to adjust the position and the angle of the screen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle adjustment:\u003c\/strong\u003e loosen the joint with a 5 mm Allen key, set the angle, then tighten it again\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor aluminium profile sim rigs\u003c\/strong\u003e (8020 profile, according to Heusinkveld)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting hardware included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer reference:\u003c\/strong\u003e HE-DD-M1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 8719689204716\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArm:\u003c\/strong\u003e aluminium profile, 150 mm long, M8 thread on both ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoints:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay interface:\u003c\/strong\u003e VESA 100 × 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle adjustment:\u003c\/strong\u003e 5 mm Allen key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium profile arm, 150 mm\u003c\/li\u003e\n\u003cli\u003e2 joints\u003c\/li\u003e\n\u003cli\u003eVESA 100 × 100 plate\u003c\/li\u003e\n\u003cli\u003eEnd cap\u003c\/li\u003e\n\u003cli\u003eAssorted mounting hardware (screws and slot nuts)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe DisplayDash is not included.\u003c\/li\u003e\n\u003cli\u003eThe M4 screws used to fix the DisplayDash to the VESA plate are supplied with the DisplayDash.\u003c\/li\u003e\n\u003cli\u003eThe VESA holes of the DisplayDash have a thread depth of 10 mm: never use longer bolts, as this may damage the product.\u003c\/li\u003e\n\u003cli\u003eThe end cap covers the sharp edges and the M8 thread of the profile when no joint is mounted on that end.\u003c\/li\u003e\n\u003cli\u003eThe Heusinkveld installation schematic shows 5 mm and 6 mm Allen keys. We have no confirmation that they are included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e Heusinkveld DisplayDash (VESA 100 × 100)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCockpit:\u003c\/strong\u003e aluminium profile sim rig (8020 profile, according to Heusinkveld)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/heusinkveld.com\/wp-content\/uploads\/2026\/10\/HV-11410-C-zonder-naam.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDisplayDash Mount installation schematic (PDF, Heusinkveld)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch3\u003eIs the DisplayDash Mount required to use the DisplayDash?\u003c\/h3\u003e\n\u003cp\u003eNo. The DisplayDash has a standard 100 × 100 VESA mount, so you can also use another VESA bracket. The Heusinkveld DisplayDash Mount is the mounting system designed for it.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the position of the screen?\u003c\/h3\u003e\n\u003cp\u003eYes. The two joints let you set the position and the angle of the DisplayDash to suit your seating position.\u003c\/p\u003e\n\u003ch3\u003eWhich screws should I use for the VESA mount?\u003c\/h3\u003e\n\u003cp\u003eUse the M4 screws supplied with the DisplayDash. The thread depth of its VESA holes is 10 mm: do not use longer bolts.\u003c\/p\u003e\n\u003ch3\u003eWho handles warranty and after-sales service?\u003c\/h3\u003e\n\u003cp\u003eThe French Simracer handles after-sales service for the Heusinkveld DisplayDash Mount, as for every brand it sells, with a contact based in France. You never deal with the manufacturer directly. The product carries the 2-year legal warranty, or the manufacturer warranty if longer.\u003c\/p\u003e\n","brand":"Heusinkveld","offers":[{"title":"Default Title","offer_id":59825734811973,"sku":"HE-DD-M1","price":59.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/6261\/7157\/files\/heusinkveld-displaydash-mount-3.jpg?v=1793023961","url":"https:\/\/thefrenchsimracer.com\/en\/products\/heusinkveld-displaydash-mount","provider":"The French Simracer","version":"1.0","type":"link"}