{"title":"Moza Racing Motion System — Actuators","description":"\u003cp\u003eWith the \u003cstrong\u003eHMA150\u003c\/strong\u003e, \u003cstrong\u003eMoza Racing\u003c\/strong\u003e makes its long-awaited entry into \u003cstrong\u003emotion\u003c\/strong\u003e simulation — and does it with a system that bridges the gap between consumer \u003cstrong\u003esim racing\u003c\/strong\u003e and professional-grade platforms. Developed entirely in-house, from the servo motors to the control software, the HMA150 turns your static rig into a full 4-actuator, 3DOF dynamic simulator reproducing pitch, roll and heave in real time.\u003c\/p\u003e\n\n\u003cp\u003eEach \u003cstrong\u003eHMA150 Haptic Motion Actuator\u003c\/strong\u003e pairs a high-performance 48V servo motor with a precision ball screw drive, delivering 150 mm of stroke, speeds up to 300 mm\/s and over 1G of acceleration with a 250 kg load. A 21-bit magnetic encoder resolving 2.09 million points and a dedicated 600 MHz processor ensure low-latency response of around 8 ms, while vibration feedback up to 200 Hz reproduces everything from engine rumble to road seams, kerb strikes and rally landings — all at under 55 dB. The controllers are integrated directly into each actuator housing: no external control boxes, no 230V wiring, just a clean and safe low-voltage installation with emergency stop and power-loss protection. The \u003cstrong\u003eMoza Motion Manager\u003c\/strong\u003e software handles tuning, while \u003cstrong\u003eAI Motion\u003c\/strong\u003e generates motion effects even in titles without native telemetry.\u003c\/p\u003e\n\n\u003cp\u003eThe system mounts on European-standard 4080, 40120 and 40160 aluminium profile \u003cstrong\u003ecockpits\u003c\/strong\u003e, and the \u003cstrong\u003eHMA Profile Adapter Kit\u003c\/strong\u003e completes the ecosystem for closed-rail 40120 and 40160 profiles, ensuring a secure bolt-on installation. At \u003cstrong\u003eThe French Simracer\u003c\/strong\u003e, the Moza HMA150 is the new benchmark for accessible high-performance motion.\u003c\/p\u003e","products":[{"product_id":"moza-haptic-motion-actuator-hma150","title":"MOZA HMA150 Motion System","description":"\u003ch2\u003eMOZA HMA150 Motion System\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMOZA HMA150 Motion System\u003c\/strong\u003e is MOZA's \u003cstrong\u003efirst flagship motion platform\u003c\/strong\u003e: a \u003cstrong\u003e4-axis, 3DOF system\u003c\/strong\u003e reproducing pitch, roll and heave for racing and flight simulation. It combines \u003cstrong\u003e150 mm of stroke\u003c\/strong\u003e, \u003cstrong\u003e300 mm\/s peak speed\u003c\/strong\u003e and \u003cstrong\u003emore than 1G of acceleration\u003c\/strong\u003e with \u003cstrong\u003ehigh-frequency vibration up to 150 Hz\u003c\/strong\u003e and \u003cstrong\u003e8 ms response time\u003c\/strong\u003e, driven by a fully in-house servo motor, a 21-bit magnetic encoder and a 600 MHz processor — all on a safe \u003cstrong\u003e48V low-voltage architecture\u003c\/strong\u003e and tuned through MOZA Motion Manager.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOZA's first flagship motion platform:\u003c\/strong\u003e the milestone that completes MOZA's integrated sim racing and flight simulation ecosystem, after its Direct Drive bases and active pedals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-stack in-house development:\u003c\/strong\u003e a proprietary high-torque-density servo motor with near-zero cogging, MOZA's own control algorithms, its own software and high-precision ball screw integration — no complex third-party adaptation needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-axis, 3DOF architecture:\u003c\/strong\u003e four actuators deliver pitch, roll and heave, with a system architecture designed to scale to 6 or 7 axes for a future full 6DOF cockpit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry-leading dynamics:\u003c\/strong\u003e 150 mm maximum stroke, 300 mm\/s peak speed and more than 1G of acceleration — enough to render suspension compression on a rally jump landing as convincingly as sustained kerb vibration on a fast circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 Hz high-frequency vibration:\u003c\/strong\u003e beyond the 100 Hz standard of leading competitors, for pronounced engine vibration tied to engine speed and the perception of subtle surface details such as expansion joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 ms ultra-low latency:\u003c\/strong\u003e rapid transient response that keeps physical feedback tightly synchronised with what happens on screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e21-bit magnetic encoder:\u003c\/strong\u003e around 2.09 million counts per revolution for ultra-accurate motion control and high-fidelity G-force feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 MHz high-performance processor:\u003c\/strong\u003e real-time processing of dynamic data with low-latency command execution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48V low-voltage architecture:\u003c\/strong\u003e a 48V DC servo system designed for the home — safer, quieter, more reliable and more energy-efficient than conventional 220V industrial drive units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated axis controller:\u003c\/strong\u003e a compact main control unit with side-mounted axis control replaces bulky external servo controllers, simplifying the system and reducing its footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB ambient lighting:\u003c\/strong\u003e customisable colours with real-time telemetry integration for ABS, traction control and flag signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotorsport-inspired design:\u003c\/strong\u003e sharply contoured actuators in high-strength aluminium alloy with matte black finish and gold accent rings, plus integrated mounting sliders for adjustable installation height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOZA Motion Manager:\u003c\/strong\u003e a professional control centre for motion amplitude, intensity, individual degree-of-freedom dynamics and vibrotactile feedback, with guided setup, self-check and automatic calibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 4-axis, 3DOF motion platform (pitch, roll, heave), scalable to 6\/7 axes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuators:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum stroke:\u003c\/strong\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak speed:\u003c\/strong\u003e 300 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum acceleration:\u003c\/strong\u003e more than 1G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration frequency:\u003c\/strong\u003e up to 150 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e 8 ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e in-house high-torque-density servo, near-zero cogging, with high-precision ball screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncoder:\u003c\/strong\u003e 21-bit magnetic, approximately 2,090,000 counts per revolution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e 600 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower architecture:\u003c\/strong\u003e 48V DC servo system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e high-strength aluminium alloy, matte black finish with gold accents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e customisable RGB with real-time telemetry (ABS, TC, flags)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl unit:\u003c\/strong\u003e compact main controller with integrated side-mounted axis control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator dimensions:\u003c\/strong\u003e 85 x 110 mm body, 475 mm length, support base Ø100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain control box:\u003c\/strong\u003e 113 x 125 x 82 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e RJ11 (actuator to control box), RJ9 (emergency stop), power adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower input:\u003c\/strong\u003e 110-220V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e integrated sliders with adjustable height, M8x16 screws and T-slot nuts on aluminium-profile rigs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended rig size:\u003c\/strong\u003e 1200 x 750 mm (minimum 700 x 500 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating environment:\u003c\/strong\u003e indoor, 15°C to 35°C, away from direct sunlight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance:\u003c\/strong\u003e grease via lubrication port approximately every 6 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware:\u003c\/strong\u003e MOZA Motion Manager\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePC only.\u003c\/strong\u003e The HMA150 is driven by MOZA Motion Manager and requires an aluminium-profile rig, with all four actuators installed perfectly vertical at the same height. It currently supports mainstream racing simulation titles, with flight simulation compatibility planned. Tested and confirmed titles include Assetto Corsa, Assetto Corsa Competizione, Assetto Corsa Evo, Assetto Corsa Rally, iRacing, Le Mans Ultimate, F1 23, F1 24, F1 25, EA SPORTS WRC, DiRT Rally 2.0, Automobilista 2, RaceRoom Racing Experience, BeamNG.drive, Forza Motorsport, Forza Horizon 5, Euro Truck Simulator 2, American Truck Simulator and Grand Theft Auto V Enhanced, with more in testing. As part of the MOZA ecosystem, it integrates seamlessly with MOZA wheelbases, pedals and accessories for plug-and-play deployment.\u003c\/p\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e keep hands and feet away from the actuators and the area beneath the seat during operation. Not suitable for pregnant users, individuals with heart conditions, elderly users or those with pre-existing medical conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e use only the factory-supplied power adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAge restrictions:\u003c\/strong\u003e not suitable for children under 12; users under 16 must be accompanied by a parent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch3\u003eWhat movements can the HMA150 reproduce?\u003c\/h3\u003e\n\u003cp\u003eThree degrees of freedom across four axes: pitch (nose up and down under braking and acceleration), roll (body lean through corners) and heave (vertical movement over kerbs, bumps and landings), with vibration up to 150 Hz layered on top for engine and surface detail.\u003c\/p\u003e\n\u003ch3\u003eWhy does the 150 Hz vibration matter?\u003c\/h3\u003e\n\u003cp\u003eMost competing platforms stop at around 100 Hz. Going to 150 Hz lets the system reproduce engine vibration tied to actual engine speed as well as fine surface irregularities — expansion joints, texture changes — that lower-frequency systems simply cannot render.\u003c\/p\u003e\n\u003ch3\u003eCan the system be upgraded to 6DOF later?\u003c\/h3\u003e\n\u003cp\u003eThe architecture is designed with scalability in mind: the standard configuration is a four-axis 3DOF platform, with the system designed to support future upgrades to 6 or 7 axes for a full 6DOF cockpit.\u003c\/p\u003e\n\u003ch3\u003eIs a 48V system safer than a traditional motion platform?\u003c\/h3\u003e\n\u003cp\u003eThe HMA150 runs on a 48V DC servo architecture instead of the 220V industrial drive units used by conventional systems. That low-voltage approach is better suited to a home environment, with improved operational safety, quieter running and higher energy efficiency.\u003c\/p\u003e\n\u003ch3\u003eWhat kind of rig do I need?\u003c\/h3\u003e\n\u003cp\u003eAn aluminium-profile rig with T-slot mounting. The recommended footprint is 1200 x 750 mm, with an absolute minimum of 700 x 500 mm. The actuators feature integrated sliders allowing adjustable installation height, and each must be mounted perfectly vertical at the same height.\u003c\/p\u003e\n\u003ch3\u003eVideo Reviews\u003c\/h3\u003e\n\u003cp\u003eSee the MOZA HMA150 Motion System in action, tested and reviewed by the sim racing community.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReview English\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"400\" src=\"https:\/\/www.youtube.com\/embed\/aUUQpJ3uIJ4\" title=\"MOZA HMA150 Motion System review\" loading=\"lazy\"\u003e\u003c\/iframe\u003e \u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"100%\" height=\"400\" src=\"https:\/\/www.youtube.com\/embed\/vZsJwtiky9c\" title=\"MOZA HMA150 Motion System review\" loading=\"lazy\"\u003e\u003c\/iframe\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReview French\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"400\" src=\"https:\/\/www.youtube.com\/embed\/s9WqCb-Onxk\" title=\"MOZA HMA150 Motion System review\" loading=\"lazy\"\u003e\u003c\/iframe\u003e \u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"100%\" height=\"400\" src=\"https:\/\/www.youtube.com\/embed\/hHPfJzBb-hE\" title=\"MOZA HMA150 Motion System review\" loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Moza Racing","offers":[{"title":"Default Title","offer_id":58385074159941,"sku":"MP001","price":3199.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/6261\/7157\/files\/MOZA-Haptic-Motion-Actuator-HMA150-Moza-Racing-471327932.png?v=1784710047"},{"product_id":"moza-hma-profile-adapter-kit","title":"MOZA HMA Profile Adapter Kit","description":"\u003ch2\u003eMOZA Racing HMA Profile Adapter Kit\u003c\/h2\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe \u003cstrong\u003eMOZA HMA Profile Adapter Kit\u003c\/strong\u003e is a mounting adapter for the \u003cstrong\u003eMOZA HMA150 Motion Actuator\u003c\/strong\u003e, required when installing the actuator on 40120 or 40160 European-standard aluminium profiles with a \u003cstrong\u003eclosed central rail\u003c\/strong\u003e. It bridges the actuator's mounting interface to closed-channel profiles, ensuring a secure, vertical installation on rigs where the standard T-slot fixing cannot be used.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for the HMA150 motion ecosystem:\u003c\/strong\u003e dedicated adapter accessory for the MOZA HMA150 Motion Actuator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolves closed-rail mounting:\u003c\/strong\u003e enables installation on 40120 and 40160 profiles whose central channel is closed and cannot accept the standard T-slot hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot always needed:\u003c\/strong\u003e if your 4080, 40120 or 40160 profile has an open central section, the actuator mounts directly and the adapter is unnecessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe MOZA HMA150 Motion Actuator is compatible with \u003cstrong\u003e4080, 40120 and 40160 European-standard aluminium profiles\u003c\/strong\u003e. This adapter kit is required only when the central rail of a 40120 or 40160 profile is closed. Tube-style cockpits are not currently supported by the HMA150 system. Check your rig's profile type before ordering: if the central channel is open, the actuator's standard mounting hardware is sufficient.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch3\u003eDo I need the HMA Profile Adapter Kit for my rig?\u003c\/h3\u003e\n\u003cp\u003eOnly if your aluminium profiles are 40120 or 40160 with a closed central rail. If the central section of your 4080, 40120 or 40160 profile is open, the HMA150 mounts directly with its standard hardware and no adapter is needed.\u003c\/p\u003e\n\u003ch3\u003eWhich cockpits are compatible with the HMA150 system?\u003c\/h3\u003e\n\u003cp\u003eThe HMA150 supports European-standard aluminium profile rigs in 4080, 40120 and 40160 sections. Tube-style cockpits are not currently supported.\u003c\/p\u003e\n\u003ch3\u003eIs the adapter compatible with the whole MOZA motion ecosystem?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed specifically for mounting the MOZA HMA150 Motion Actuator. One adapter is used per actuator installed on a closed-rail profile.\u003c\/p\u003e","brand":"Moza Racing","offers":[{"title":"Default Title","offer_id":58385085071685,"sku":"MP003","price":59.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/6261\/7157\/files\/MOZA-HMA-Profile-Adapter-Kit-Moza-Racing-471328112.png?v=1784710174"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/6261\/7157\/collections\/Moza-Racing-Motion-System-Actuators-The-French-Simracer-471662726.jpg?v=1785328577","url":"https:\/\/thefrenchsimracer.com\/en\/collections\/moza-racing-motion-system-actuators-the-french-simracer.oembed","provider":"The French Simracer","version":"1.0","type":"link"}